Cue controlCUE Uživatelský manuál stáhnout pdf (Strana 13)

controlCUE Controllers | Connecting

SERIAL

Bi-directional Serial RS-232/422/485 with Power 24 VDC

Overview

This bi-directional serial channel is used for RS-232, RS-422 and RS-485 communication and for power

supply 24 VDC and it is applicable as SERIAL 1. Maximum speed is 115 200 Bd (bps). Default mode for all

channels is RS-232, other modes must be set in programming application. For more details see programming

manuals.

RS-232 Mode

Output signal levels for RS-232 are in the -10 V to +10 V range. This is default mode.

RS-232 with power 24 VDC

7-pin 3.5 mm Pin Signal Description Direction

1 2 3 4 5+ G

+24 +24 Power +24 VDC

G GND Ground

1 TxD RS-232 Transmitted Data From controller

2 RTS RS-232 Request to Send From controller

3 GND Ground

4 RxD RS-232 Received Data To controller

5 CTS RS-232 Clear to Send To controller

RS-422 Mode

This mode must be set in the programming application.

RS-422 with power 24 VDC

7-pin 3.5 mm Pin Signal Description Direction

1 2 3 4 5+ G

+24 +24 Power +24 VDC

G GND Ground

1 Tx A+ RS-422 Transmit Data (Idles High) From controller

2 Tx B- RS-422 Transmit Data (Idles Low) From controller

3 GND Ground

4 Rx A+ RS-422 Receive Data (Idles High) To controller

5 Rx B- RS-422 Receive Data (Idles Low) To controller

RS-485 Mode (CUEwire)

This mode is suitable for connection of CUEwire devices and it must be set in the programming application.

This mode can be also used for general RS-485 communication and must be set in the programming

application.

SERIAL RS-485

5-pin 3.5 mm Pin Signal Description

1 2 3 4 5+ G

CUEwire

+24 +24 Power +24 VDC

G GND Ground

1 A+

RS-485 Data +

2 B-

RS-485 Data -

3 GND

Ground

4 N.C.

Not Connected

5 N.C.

Not Connected

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Komentáře k této Příručce

Žádné komentáře

Cue controlCUE Uživatelský manuál Strana 13

Komentáře k této Příručce